Maximum efficiency is achieved through pyrolytic two-phase combustion. The design of the dryer remains unchanged when the system is connected; the standard burners and fuel equipment are not switched off, and the switch to standard fuel (gas, diesel, or furnace fuel) takes place within 20–40 minutes. Thanks to two-phase combustion, there is no adverse effect on the grain (confirmed under laboratory conditions). There is no need to construct specialised foundations or develop design documentation for the heat generator
GRECO HEAT GENERATOR — an automatic solid-fuel system comprising a set of equipment designed exclusively for use in grain dryers, which ensures an automated drying process whilst maintaining the required temperature conditions and meeting the technical specifications of the grain dryers.
About the Greco Group’s comprehensive approach:
- Equipment manufacturing.
- Delivery (loading and unloading).
- Installation (including accommodation and meals for staff).
- Electrical installation.
- Commissioning work (start-up of the grain dryer together with the heat generator).
- Staff training (briefing).
IMPORTANT!
Connecting a grain dryer to a GRECO heat generator delivers performance comparable to that of a gas burner.
Convective heat exchanger
Heat recovery system — a design in which heated clean air outside the heat exchanger remains in the ‘air jacket’, after which it is fed into the hot-air duct by the grain dryer’s fans.
WE EQUIP GRAIN DRYERS OF LEADING BRANDS:
The Greco Group’s automatic solid-fuel system is a set of equipment designed exclusively for use on grain dryers, providing an automated drying process that maintains the required temperature conditions and meets the technical specifications of the grain dryers.
Environmental friendliness
Laboratory
quality verification
No additional
staff required
High-quality AISI materials
Energy savings
Double insulation of all
external surfaces
Electrical power: 3–5.5 kW
20–30 minutes to reach operating mode
(from the moment of start-up)
Compact size: 4x5m
After-sales service
No additional
equipment required
Absence of a heat exchanger
(ensures maximum efficiency and savings)
45–150 degrees
with automatic control
Submit your application and find out how to receive a 25% refund from the government
Fill in the form and one of our managers will get in touch with you!
You can also contact us for advice:
Types of fuel for grain drying on the Greco system
Do you have any questions?
Fill in the form and one of our managers will get in touch with you!
You can also contact us for advice:
